Focus® Ultra
Focus® Ultra - An effective post-emergent herbicide for the control of annual and perennial grasses in broadleaf- and forestry crops.
Focus® Ultra
Focus® Ultra - An effective post-emergent herbicide for the control of annual and perennial grasses in broadleaf- and forestry crops.
Benefits
Focus® Ultra:
- Is highly selective and safe to use on listed crops.
- Has a wide application spectrum satisfying specific application needs in terms of grass spp., the weed growth stage and type of application.
- Inhibits lipid synthesis in the growth areas, impeding formation of cells.
- Ceases growth immediately.
- Causes growth points to break easily.
- Causes the discolouration of grasses over a period of 1 – 3 weeks after application.
Downloads and Links
| Label | |
|---|---|
| Safety Data Sheet |
Details
General information
| Name | Focus® Ultra |
|---|---|
| Formulation | Emulsified Concentrate |
| Ingredients | 100 g / lt cycloxydim (cyclohexenone compound) |
| Registration Number | L4319 |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section. | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section. | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section. | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
Grasses
| Recommended rate | Time of application | Number of application |
|---|---|---|
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section | Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. | - |
General
General information
| Name | Focus® Ultra |
|---|---|
| Formulation | Emulsified Concentrate |
| Ingredients | 100 g / lt cycloxydim (cyclohexenone compound) |
| Registration Number | L4319 |
Crop and Pest details
Avocado
Back
Avocado - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Citrus
Back
Citrus - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Conventional Sunflower
Back
Conventional Sunflower - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Cotton
Back
Cotton - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Dry Bean
Back
Dry Bean - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Groundnuts/Peanuts
Back
Groundnuts/Peanuts - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Lupin
Back
Lupin - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section. |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Lychee
Back
Lychee - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Macadamia
Back
Macadamia - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Mango
Back
Mango - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Onions
Back
Onions - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Other Tree Nuts
Back
Other Tree Nuts - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Papayas
Back
Papayas - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Pasture
Back
Pasture - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Pineapple
Back
Pineapple - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Potatoes
Back
Potatoes - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Pumpkin/Squash
Back
Pumpkin/Squash - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Soybean - Soya
Back
Soybean - Soya - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Stone-Fruit
Back
Stone-Fruit - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section. |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Tables Grapes
Back
Tables Grapes - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Tobacco
Back
Tobacco - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Tomato
Back
Tomato - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Trees And Shrubs
Back
Trees And Shrubs - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section. |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |
Wine Grapes
Back
Wine Grapes - Grasses
| Recommended rate |
| 0.8 – 4 lt / ha. Please see the specific application rates in the Additional media section |
| Time of application |
| Application timing:Focus® Ultra can be applied over the top at any stage of the crop, provided that safety periods as indicated under WARNINGS are adhered to. Ensure that the grass weeds are not beyond the growth stage as indicated in the APPLICATION RATES TABLE.Row– and spot treatments:Focus® Ultra can also be applied as a row treatment in which case the dosage rate and spray volume per ha should be adapted accordingly. In cases where only patches in the field are infested with grass weeds, it is recommended to apply Focus® Ultra as a spot treatment with a knapsack sprayer as a 2 % Focus® Ultra solution (200 ml Focus® Ultra / 10 lt water).Acidity of spray mixture:Focus® Ultra normally performs better when applied in a slightly acid spray mixture with a pH of about 4 – 5. It is therefore advisable to add a pH–buffer solution, e. g. Bladbuff ‘5’, to the mixture in cases where the pH of the spraying water is higher than the indicated optimum value. Refer to the Bladbuff ‘5’ label for more details.All spray applications must be made with suitable equipment that is in good working order and correctly calibrated to give the desired coverage for that particular method of application. |
| Number of application |
| - |