Agricultural Solutions

Agriculture

Contact

Bellis®

Fungicide

The AgCelence® solution for sunflowers, gives you benefits above and beyond normal crop protection.

Benefits

Targeted fungal diseases will be effectively controlled by Bellis®, giving you higher quality crops and an improved return on investment.

The AgCelence® solution for sunflowers, gives you benefits above and beyond normal crop protection.

Get the best return on investment:

  • Higher yields
  • Excellent disease control
  • Increased production
  • Increased stress tolerance

Ensures peace of mind with excellent disease control

  • Reliable and effective performance
  • Provides extensive protection through its translocation action
  • Rapid uptake and fast distribution into the leaves

Resistance management

  • Distinct dual mode of action with the combination of Boscalid and F500®

Targeted fungal diseases will be effectively controlled by Bellis®, giving you higher quality crops and an improved return on investment.

Bellis®

Reg. No. L7817 Act No. 36 of 1947

A waterdispersible granular fungicide for the preventive control of fungal diseases as listed.

FRAC FUNGICIDE GROUP CODES 11 & 7

Active ingredients:

F500®........................................................ 128 g / kg

boscalid (pyridine–carboxamide)..........252 g / kg

Registered by:

BASF South Africa (Pty) Ltd

Co. Reg. No. 66/10235/07

P.O. Box 2801

Halfway House 1685

UN No.: 3077

Emergency Number: 083 265 3805

™Registered Trade Mark of BASF

F500® - pyraclostrobin (methoxy-carbamate)

General information

Name Bellis®
Formulation Water dispersible granule
Ingredients 252 g / kg boscalid (pyridine-carboxamide), 128 g / kg F500®
Label Bellis® Label
Safety Data Sheet Bellis® SDS

Bellis™ is compatible on potatoes with the following products, Acrobat® WG (Reg. No. L6526), Hunter™24 (Reg. No. L5533), Fastac® SC (Reg. No. L4992), abamectin and methamidophos with no negative effect.

Information on crops and pests

Pests Recommended rate Time of application Number of application
Blossom blight 800 g / ha Bellis® - Apply Bellis®, prior to disease development, as part of a programme, commencing at flower tassel emergence, followed with a second application two weeks later.Apply Bellis® in 1200 - 1500 l water / ha.Resistance management: To limit the potential for development of resistance, do not make more than three Bellis® or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3 applications
Disease Fruit, Growing point, Leaf, Whole plant 800 g / ha Bellis® - Apply Bellis®, prior to disease development, as part of a programme, commencing at flower tassel emergence, followed with a second application two weeks later.Apply Bellis® in 1200 - 1500 l water / ha.Resistance management: To limit the potential for development of resistance, do not make more than three Bellis® or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3 applications
Fungal disease (leaf spot) 800 g / ha Bellis® - Apply Bellis®, prior to disease development, as part of a programme, commencing at flower tassel emergence, followed with a second application two weeks later.Apply Bellis® in 1200 - 1500 l water / ha.Resistance management: To limit the potential for development of resistance, do not make more than three Bellis® or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3 applications
Pests Recommended rate Time of application Number of application
Disease Fruit 60 g / 100 lt water Bellis® - The first application should be done at the start of the post-harvest flush, before first autumn rain, with a maximum of three applications (FRAC guidelines) per season, as needed to cover the new growth into winter. Maximum 3
Pests Recommended rate Time of application Number of application
Blueberry Rust 60 g / 100 lt water Bellis® - The first application should be done at the start of the post-harvest flush, before first autumn rain, with a maximum of three applications (FRAC guidelines) per season, as needed to cover the new growth into winter. Maximum 3
Pests Recommended rate Time of application Number of application
Blossom blight 800 g / ha Bellis® - Apply Bellis®, prior to disease development, as part of a programme, commencing at flower tassel emergence, followed with a second application two weeks later.Apply Bellis® in 1200 - 1500 l water / ha.Resistance management: To limit the potential for development of resistance, do not make more than three Bellis® or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3 applications
Disease Fruit, Growing point, Leaf, Whole plant 800 g / ha Bellis® - Apply Bellis®, prior to disease development, as part of a programme, commencing at flower tassel emergence, followed with a second application two weeks later.Apply Bellis® in 1200 - 1500 l water / ha.Resistance management: To limit the potential for development of resistance, do not make more than three Bellis® or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3 applications
Fungal disease (leaf spot) 800 g / ha Bellis® - Apply Bellis®, prior to disease development, as part of a programme, commencing at flower tassel emergence, followed with a second application two weeks later.Apply Bellis® in 1200 - 1500 l water / ha.Resistance management: To limit the potential for development of resistance, do not make more than three Bellis® or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3 applications
Pests Recommended rate Time of application Number of application
Anthracnose 500 g / ha Apply Bellis™ as a preventive treatment at 10 – 14 day intervals. Bellis™ should be applied as part of a programme application with a maximum of 3 applications per season.All other applications for disease control, must be made with different Fungicide Group Codes.Apply Bellis™ in 300 – 500 lt water / ha.Ensure good coverage of the plants. Maximum 3 applications
Fungal disease (leaf spot) 500 g / ha Apply Bellis™ as a preventive treatment at 10 – 14 day intervals. Bellis™ should be applied as part of a programme application with a maximum of 3 applications per season.All other applications for disease control, must be made with different Fungicide Group Codes.Apply Bellis™ in 300 – 500 lt water / ha.Ensure good coverage of the plants. Maximum 3 applications
Fungal disease (powdery mildew) 500 g / ha Apply Bellis™ as a preventive treatment at 10 – 14 day intervals. Bellis™ should be applied as part of a programme application with a maximum of 3 applications per season.All other applications for disease control, must be made with different Fungicide Group Codes.Apply Bellis™ in 300 – 500 lt water / ha.Ensure good coverage of the plants. Maximum 3 applications
Pests Recommended rate Time of application Number of application
Fungal disease (leaf spot) 600 - 800 g / ha Bellis® - Number of applications: Apply a maximum of two Bellis® applications per season. The lower rate is suitable when applied at the early growth stage and before disease appearance. Use the higher rate for the second application.Application timing: The first application should be made, when 6 – 8 true leaves are unfolded and ideally before any disease symptoms are present.The second application should be made at the beginning of flowering (first yellow petal leaves showing).Do not apply Bellis® once the flower heads start hanging.Water volume: Apply Bellis® in at least 300 - 400 l / ha water over the top of the plants, ensuring thorough leaf coverage and canopy penetration.Effect on other diseases: Good suppression of powdery mildew (Erysiphe cichoracearum) will be achieved when Bellis® is applied at the higher rate and prior to disease development. Maximum 2
Pests Recommended rate Time of application Number of application
Blossom blight 800 g / ha Bellis® - Apply Bellis®, prior to disease development, as part of a programme, commencing at flower tassel emergence, followed with a second application two weeks later.Apply Bellis® in 1200 - 1500 l water / ha.Resistance management: To limit the potential for development of resistance, do not make more than three Bellis® or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3 applications
Disease Fruit, Growing point, Leaf, Whole plant 800 g / ha Bellis® - Apply Bellis®, prior to disease development, as part of a programme, commencing at flower tassel emergence, followed with a second application two weeks later.Apply Bellis® in 1200 - 1500 l water / ha.Resistance management: To limit the potential for development of resistance, do not make more than three Bellis® or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3 applications
Fungal disease (leaf spot) 800 g / ha Bellis® - Apply Bellis®, prior to disease development, as part of a programme, commencing at flower tassel emergence, followed with a second application two weeks later.Apply Bellis® in 1200 - 1500 l water / ha.Resistance management: To limit the potential for development of resistance, do not make more than three Bellis® or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3 applications
Pests Recommended rate Time of application Number of application
Blossom blight 800 g / ha Bellis® - Apply Bellis®, prior to disease development, as part of a programme, commencing at flower tassel emergence, followed with a second application two weeks later.Apply Bellis® in 1200 - 1500 l water / ha.Resistance management: To limit the potential for development of resistance, do not make more than three Bellis® or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3 applications
Disease Fruit, Growing point, Leaf, Whole plant 800 g / ha Bellis® - Apply Bellis®, prior to disease development, as part of a programme, commencing at flower tassel emergence, followed with a second application two weeks later.Apply Bellis® in 1200 - 1500 l water / ha.Resistance management: To limit the potential for development of resistance, do not make more than three Bellis® or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3 applications
Fungal disease (leaf spot) 800 g / ha Bellis® - Apply Bellis®, prior to disease development, as part of a programme, commencing at flower tassel emergence, followed with a second application two weeks later.Apply Bellis® in 1200 - 1500 l water / ha.Resistance management: To limit the potential for development of resistance, do not make more than three Bellis® or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3 applications
Pests Recommended rate Time of application Number of application
Alternaria 300 g / ha Apply Bellis™ as a preventive treatment at 10 – 14 day intervals. Bellis™ should be applied as part of a programme application with a maximum of 3 applications per season.All other applications for the control of Purple blotch, must be made with different Fungicide Group Codes.Apply Bellis™ in 300 – 500 lt water / ha. Ensure good coverage of the plants. Always add a wetter / sticker to the spray solution. Maximum 3 applications
Pests Recommended rate Time of application Number of application
Blossom blight 800 g / ha Bellis® - Apply Bellis®, prior to disease development, as part of a programme, commencing at flower tassel emergence, followed with a second application two weeks later.Apply Bellis® in 1200 - 1500 l water / ha.Resistance management: To limit the potential for development of resistance, do not make more than three Bellis® or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3 applications
Disease Fruit, Growing point, Leaf, Whole plant 800 g / ha Bellis® - Apply Bellis®, prior to disease development, as part of a programme, commencing at flower tassel emergence, followed with a second application two weeks later.Apply Bellis® in 1200 - 1500 l water / ha.Resistance management: To limit the potential for development of resistance, do not make more than three Bellis® or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3 applications
Fungal disease (leaf spot) 800 g / ha Bellis® - Apply Bellis®, prior to disease development, as part of a programme, commencing at flower tassel emergence, followed with a second application two weeks later.Apply Bellis® in 1200 - 1500 l water / ha.Resistance management: To limit the potential for development of resistance, do not make more than three Bellis® or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3 applications
Pests Recommended rate Time of application Number of application
Diseases fruit, leaf, stem 60 g / 100 lt water 3 Bellis™ applications are recommended in a programme, commencing 10 days before full bloom.Apply at high volume to the point of run–off to ensure thorough coverage. 3
Pests Recommended rate Time of application Number of application
Blossom blight 800 g / ha Bellis® - Apply Bellis®, prior to disease development, as part of a programme, commencing at flower tassel emergence, followed with a second application two weeks later.Apply Bellis® in 1200 - 1500 l water / ha.Resistance management: To limit the potential for development of resistance, do not make more than three Bellis® or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3 applications
Disease Fruit, Growing point, Leaf, Whole plant 800 g / ha Bellis® - Apply Bellis®, prior to disease development, as part of a programme, commencing at flower tassel emergence, followed with a second application two weeks later.Apply Bellis® in 1200 - 1500 l water / ha.Resistance management: To limit the potential for development of resistance, do not make more than three Bellis® or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3 applications
Fungal disease (leaf spot) 800 g / ha Bellis® - Apply Bellis®, prior to disease development, as part of a programme, commencing at flower tassel emergence, followed with a second application two weeks later.Apply Bellis® in 1200 - 1500 l water / ha.Resistance management: To limit the potential for development of resistance, do not make more than three Bellis® or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3 applications
Pests Recommended rate Time of application Number of application
Early Blight (Tomato) 300 g / ha Ground application: Apply Bellis™ as part of a preventive spray programme at 10 – 14 day intervals. In the programme, alternate with unrelated contact fungicides. e.g. Polyram® (Reg. No. L5268)Apply a maximum of three Bellis™ applications per season.Apply Bellis™ in at least 500 lt water / ha. Ensure good coverage of the plants Aerial application: Apply in 30 – 40 lt water / ha. Maximum 3
Pests Recommended rate Time of application Number of application
Disease Fruit 60 g / 100 lt water Bellis® - The first application should be done at the start of the post-harvest flush, before first autumn rain, with a maximum of three applications (FRAC guidelines) per season, as needed to cover the new growth into winter. Maximum 3
Pests Recommended rate Time of application Number of application
Soybean rust 600h/Ha Bellis® on Soyabeans: Spray preventively before the first signs of disease development is noticed (normally on the onset of flowering) and repeat 21-28 days later. Apply the shorter interval of 21 days when high disease pressure is expected due to weather conditions that favour disease development. 3
Pests Recommended rate Time of application Number of application
Anthracnose 1.2 kg / ha Bellis® - Apply Bellis® as part of a preventive spray programme. Apply at high volume, with a 7 - 14 day spray interval, with applications commencing no later than 10 % bloom, or prior to disease development.Use the shorter interval, when conditions favour disease development.Resistance management: To limit the potential for development of resistance, do not make more than thee Bellis®, or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3
Disease Fruit 1.2 kg / ha Bellis® - Apply Bellis® as part of a preventive spray programme. Apply at high volume, with a 7 - 14 day spray interval, with applications commencing no later than 10 % bloom, or prior to disease development.Use the shorter interval, when conditions favour disease development.Resistance management: To limit the potential for development of resistance, do not make more than thee Bellis®, or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3
Powdery mildew (Tomatoes) 1.2 kg / ha Bellis® - Apply Bellis® as part of a preventive spray programme. Apply at high volume, with a 7 - 14 day spray interval, with applications commencing no later than 10 % bloom, or prior to disease development.Use the shorter interval, when conditions favour disease development.Resistance management: To limit the potential for development of resistance, do not make more than thee Bellis®, or other Group 7 or 11 fungicides applications, per season. Do not make more than two sequential applications of Bellis®, before alternating to a registered fungicide with a different mode of action. Maximum 3
Pests Recommended rate Time of application Number of application
Early Blight (Tomato) 300 g / ha (If water volume exceeds 500 lt water / ha apply at the rate of 60 g Bellis™ / 100 lt water) Apply Bellis™ as part of a preventive spray programme at 10 – 14 day intervals. In the programme, alternate with unrelated contact fungicides. e.g. Polyram®.Apply a maximum of three Bellis™ applications per season.Apply Bellis™ in at least 500 lt water / ha.Ensure good coverage of the plants. Maximum 3 applications
Top